Where Smart Outlets Save the Most Energy

Elizabeth Frank18 Jan 2022

Smart outlets can reduce your energy bill by up to 40% or more, and the best part is that they are easy to install. You’re now able to use smart outlets for your devices, which allows you to save a lot of energy in the long term. Smart outlets also reduce power surges and give clearer feedback about how much power is left in each outlet. These outlets are equipped with technology that detects when something has been plugged into them, meaning you will never have an unfortunate experience where you plug in your laptop and find out it’s dead because of a faulty outlet.

Check out this article to know more!

How Do Smart Outlets Save Energy?

Smart outlets save energy because they can automatically detect when an outlet is being used and turned it off. For example, if someone is using a hairdryer, the smart outlet will turn off automatically. This prevents the device from drawing electricity from a nearby circuit and causing power spikes. It also helps you save money on your energy bill.

Another way that smart outlets save energy is by adjusting the flow of electricity to devices plugged into them based on how often they are being used. If someone plugs in a device that uses a high amount of power (such as a small TV), then if it's not being used, it'll pull low amounts of electricity from the circuit and vice-versa with other devices plugged into the outlet. For example, let's say your bathroom has two towel racks and one uses a small TV while the other doesn't use any power at all.

The first time you plug in your hairdryer to this particular outlet, you won't experience any power spikes because it'll be pulling low amounts of electricity from the circuit for only its use time. But, if you plug in your TV to this same outlet on a regular basis, it would cause more frequent power spikes for itself or for other appliances plugged into the same circuit. The same goes for devices plugged into your outlets at home, which means you'll save more energy by only using the ones that are necessary at any given time.

This is why smart outlets can be beneficial to homes with children who tend to leave their bedroom lights on overnight, or people who like to leave their curling irons plugged in all the time.

Even if you aren't concerned about energy savings, smart outlets can still be beneficial because they do work to prevent power spikes and blackouts. A power spike is an excess of electricity that flows through a circuit for a short time and can damage your electronic devices such as TVs, microwaves, etc., which would require replacement.

Where Smart Outlets Save the Most Energy

Smart outlets are devices that detect when you plug in a device, and then automatically adjust their settings to prevent power surges. This prevents your electricity bill from skyrocketing when you leave the TV or computer on standby.

Here are some other areas where smart outlets save energy:

  • In your bathroom or hallway, they can detect when someone is using the toilet and turn off the water while you're still in the shower or bath.
  • In your basement, they can sense when a freezer is open and shut off the compressor when you close it.  They also shut off lights, electronics, and TVs to conserve power when you're not at home.
  • In your kitchen, they can sense if there's nothing being cooked and adjust the oven temperature so it doesn't waste electricity by staying on all day long.
  • In your garage, they can tell if you're working on a project there and turn off certain electronics when they sense you're no longer in the room.

Every home is different, but any smart outlet in your household could save significant amounts of energy every month. Smart outlets will detect when a device has been unplugged and automatically shut down the circuit so no one gets an electric shock.

Additional Tips In Using Smart Outlets

Energy consumption is something that affects us all, and it is important to do what you can to reduce your carbon footprint. Smart outlets are an easy and cost-effective way to make a difference. Here are some additional tips for using smart outlets.

1. Remote control

When you are not home, it is possible to turn off your devices remotely through your smartphone or tablet. You can even do this when the power goes out! This makes sure that electronics stop being a drain on energy supplies. It takes all of the worries out of leaving the house with appliances still plugged in.

2. Timers

Another way to save energy is by using timers for your devices. For example, you can set a lamp to be powered off after a certain time at night, or have your TV turn off automatically when it's not being watched. You can even have your iron shut off after a specific amount of time. This is a very easy way to make sure electronics are not left on when they are not being used.

3. Surge protection

Smart outlets can give you surge protection for your devices, making them more secure in the event of power problems or surges. When you have smart outlets installed, you get peace of mind knowing that there is a way to protect your devices from dangerous surges.

4. Energy reports

Smart outlets can give you an energy report so you know which devices use the most power when it is being used or when it is turned on, and you can compare this information with power consumption in previous months. This will help you identify ways to conserve energy and help you cut back on your usage of electricity.

Conclusion

Smart outlets are a smart way to save energy by turning off appliances when they're not in use. The outlets will also automatically switch to standby mode if they detect that appliances are plugged in and operating. This way, you don't waste energy and money on electricity when you're not using the appliances.

Elizabeth Frank

Elizabeth Frank

Hope you enjoyed my post. I'm Liz, an interior designer that found her calling with smart gadgets.

Comments (0)

All Copyrights Reserved © 2022