If you ever have a problem with your WeMo light switch, you're not alone. It seems like every day we're facing new problems with our home electronics. Whether it's our Wi-Fi connection dropping out or our lights going out, we all know how frustrating it can be to have to fix something on our own. But if you don't know how to fix a WeMo light switch, you might end up spending hours looking for a solution that doesn't work. This is why we've put together this guide to help you fix a WeMo light switch that blinks orange.
If you're not familiar with the WeMo Light Switch, it's a device that looks and functions similarly to a standard light switch but is connected to your home's Wi-Fi network instead. It enables you to control your lights from anywhere in the world using your smartphone. After setting up the WeMo light switch for the first time, it will function exactly like any other light switch. With a simple flip of the switch, you can turn on the lights in your home. However, if you have an Android or iOS mobile device and have downloaded and installed the associated app, you can use it to turn on and off your lights from anywhere in the world as well. This is particularly useful for people who are away from home for work or pleasure. You can use the app to turn on and off your lights at any time that is convenient for you, including at night!
Your WeMo light switch blinks orange when it loses its connection to your Wi-Fi network. This can be a very frustrating experience, especially if you just got the device and are still in the process of setting it up. The first thing you should do is make sure your Wi-Fi is working properly. If you're using a wireless router, make sure it's within range of your WeMo light switch. If you're using a wired connection, then check that your Ethernet cable is connected properly to both devices. And if everything seems fine with your Wi-Fi setup, then the next thing you'll want to do is reset your WeMo light switch.
Now that we've told you about how awesome this device is, let's get down to business! You might be reading this because one of these two scenarios happened to you:
No matter what the case, we're here to help! Here are some steps that you can take to fix your WeMo light switch that blinks orange:
Simply unplug your WeMo Light Switch from the power outlet for approximately one minute to complete the process. When you have finished, plug the device back in and wait for a couple of minutes to see if it starts blinking orange again or if it stops blinking altogether. If this is the case, this may only be a temporary fix that will allow you to troubleshoot any further issues with the device or your home Wi-Fi network in the future. If this is the case, continue reading!
An often-overlooked step in the process of troubleshooting Wi-Fi devices is the process of troubleshooting your home Wi-Fi network. We understand that it appears to be a lot of work, but sometimes you have to get down and dirty with the details in order to resolve your issues. You can troubleshoot your home Wi-Fi network by following the steps outlined in this article. a) Go to your wireless router's admin page and check for any firmware updates that might be available for it. If there are any, then make sure you download and install them. b) To avoid interference, make sure that any other devices connected to the Wi-Fi network (laptops, smartphones, tablets, and so on) are connected directly to the router rather than through a secondary device such as a modem or repeater. Ensure that your modem/router combo unit is properly configured. c) If you're using a Wi-Fi extender to boost your router's signal, then make sure that it's connected directly to the router and not through another Wi-Fi device like a modem or a repeater. If you're using a Wi-Fi range extender, then make sure that it's set up correctly. d) Verify that all of your devices are connected to your wireless network and that they are properly configured. Make sure that every device is configured to use the correct IP address and/or subnet mask. For example, if you have reserved a specific IP address for a specific device. You can learn more about how to configure devices on your network by reading our guide. e) Confirm that all of your devices are connected to the correct wireless network name (SSID). You can find out how to change the SSID of your wireless router in this section: How to Change The Wireless Network Name (SSID) Of Your Router. f) Ensure that your router is running the most recent firmware. Firmware updates often include bug fixes and security patches, so it's important to keep them up-to-date. We recommend checking for firmware updates at least once a month, if not more often, as new updates are released by manufacturers frequently.
A WeMo light switch can blink orange if it’s not working correctly. Troubleshooting can be a bit of a challenge, so it’s important to have a plan for fixing a WeMo light switch that blinks orange. If you’re not sure what the problem is, you can always refer to this guide for a list of issues and solutions. If your WeMo light switch is blinking orange, then it may be time to replace it with a new one.